Of all the places for your iPod to land when you dropped it... We can repair or replace the LCD in your iPod Nano and get you back in business quickly. Order the part below or open a repair order and let our qualified technicians repair or replace your LCD and put that iPod Nano back in service!

This is our most popular service - the two most common iPod repairs have been lumped into our iPod Refurbish Program. You can restore your iPod to look like it did in the past and make it perform better than it did from the factory! The iPod refurbish program includes replacement front bezel plastics (minus the scratches that you have now) and one of our new, hi-capacity iPod batteries installed.

This program represents a $25.00 - $40.00 savings over ordering individually and since this refurb program already involves stripping your iPod completely down, any additional services needed would have all labor costs removed (LCD replacement, scroll-wheel, etc..).
The iPod will be refurbished to its original color unless you specifically request that the color be changed (white to black or black to white). This service is available for all 1st Gen Nano iPods, regardless of size.

We don't blame you, we love the Nano too! Don't you wish the battery lasted as long as Apple says it does? Now it can, the enhanced 400mAh iPod Nano battery we offer provides up to 20% more capacity when fully charged than the internal battery that came with your Nano. This battery has been developed with the same lithium-ion polymer technology as the original but with all of the capacity that can be squeezed into that tiny case.

You won't find a better battery for your iPod Nano. Now, this repair is not for the faint of heart and since this is a solder-on part, we only offer this battery through our mail-in repair service. This battery fits all iPod Nano models (1gb, 2gb, 4gb).

This is the one you've heard about. This case comes with a secure neck lanyard and wrist strap that can be attached, and has a built-in loop in the rear to make attachment to an armband very secure. The delicate screen of your Nano is protected with a crystal clear hard plastic plate and the plastics and polished rear cover of your iPod are protected as well. Your Nano is held securely in place with two individual locks.

All ports are still accessable while the Nano is in this attractive, protective case. There's no need to ever remove it! If you only buy one thing for your iPod Nano - this is the accessory to get!

The Metal Deluxe Case for Apple Nano is made of 100% anodized aircraft-grade aluminum. The case is designed to preserve the sleek profile of the iPod and still gives full access to your digital music player. Cutouts give easy access to headphone port, sync port and all vital iPod controls. The interior of the case is lined with neoprene to cushion your iPod from impact shocks. The LCD is protected behind a strong, clear window. With this form-fitting metal case, your iPod investment is well protected.

This Innopocket case comes with a removable belt clip and lanyard as well. This is for the 1st Generation iPod Nano (1, 2 or 4gb with chrome rear covers and either white or black plastic bezels).

Please don't open your iPod's case with a screwdriver! These tools are made of a special nylon polymer that is hard enough to get the case open but not hard enough to crack or chip the acrylic front case. These are the same tools that come with our battery kits and are preferred by iPod mechanics worldwide. These tools come two per set. If you open your iPod's case with anything else, you do so at your own peril.

These are OEM Apple iPod earbuds. Each set of earbuds includes two sets (4pcs) of replacement foam pads.

Our repair center looks at dozens of iPods every day that require repairs (sometimes expensive) because of damage caused to the audio jack by aftermarket earbuds / headphones. If the length of the plug is too long, the audio jack of the iPod itself is damaged, audio is distorted or one channel drops from the audio output.

Eliminate the possibility of damage and make your iPod sound like it did when you first got it.

Use an extra iPod Power Adapter for home, office or travel. This is a USB wall charger that is used to charge your iPhone from any 110v outlet instead of always having a computer around.

Direct from the Brando Workshop. Mini retractable USB to iPod cable for HotSyncing the iPod (Units with the Sync Port/Dock Connector on bottom). This short short cable is easier for carrying anywhere and one quick pull on the cable ends extends the cable to a full 31 inches and allows you to sync your data on the go.

The Auto/Car Charger works in all iPods with the sync port on the bottom of the unit. Never be without your tunes... keep that lithium battery topped off whenever possible. How can you live without this?

This is the OEM USB sync cable for your iPod. The most common cause of syncing problems - you can't afford to not have an extra (and you can't just pick these up anywhere when you need one). Every iPod user needs at least one extra cable and the smart owner will have a couple of extras.

Ouch! It seems like it would take more to turn that beautiful new iPod Video into such an ugly duckling! You wouldn't think that slipping it into your pocket with your keys (like they do on the commercial) would scratch up the screen like it has - but as you may have already discovered, it doesn't take much to make that pretty new iPod turn into something hideous that you keep hidden in your pocket. This is the entire front plastics including the clear cover for the lcd (but not the lcd itself) but does not include the scroll/click wheel.

These are brand new bezels - not a scratch on them - just like yours was before you used it the first time. What a perfect time to add the clear crystal case (available on this page as well) to keep this from happening again.

The entire "guts" of the iPod are built into the front bezel, so if this seems like more of a challenge than you are willing to handle, send it in for one of our qualified technicians to perform the plastic surgery for just a few dollars more.

Does your iPod Nano look like a worn down door handle? If so, you need to replace the rear casing with a new one. These are new rear casings that will fit the 1st generation iPod Nano.

If things just aren't "clicking" anymore or there is damage to your wheel assembly (torn cable, connectors, etc..), you probably need a new click-wheel.